MuskieFIRST | Shoot-through-hull on a Tuffy » Muskie Boats and Motors

Muskie Discussion Forums

You are logged in as a guest. ( logon | register )

Moderators: Slamr	View previous thread :: View next thread
Jump to page : 1 Now viewing page 1 [30 messages per page] Muskie Fishing -> Muskie Boats and Motors -> Shoot-through-hull on a Tuffy

Message Subject: Shoot-through-hull on a Tuffy

Paul S

Posted 2/9/2017 9:15 AM (#849203)
Subject: Shoot-through-hull on a Tuffy

Posts: 228

Location: Tinley Park, IL

For those of you who have done this, what epoxy did you use? How much did you rough up the fiberglass? Any other tips?

I have read a bunch and watched videos on doing this but I thought I would ask since there are a bunch of Tuffy guys on here. Thanks for any advice.

Edited by Paul S 2/9/2017 9:16 AM

danlaboucane

Posted 2/9/2017 9:57 AM (#849211 - in reply to #849203)
Subject: Re: Shoot-through-hull on a Tuffy

Posts: 483

not a tuffy but done this last summer:used the epoxy that came with the hummingbird puck and used a eltectric drill with a 80 grit pad and not too rough followed the directions and great result .

sworrall

Posted 2/9/2017 10:54 AM (#849218 - in reply to #849203)
Subject: Re: Shoot-through-hull on a Tuffy

Posts: 32886

Location: Rhinelander, Wisconsin

Just use acetone to clean/dry the area and 5 minute epoxy. It will take a hammer to remove it.

Jump to page : 1
Now viewing page 1 [30 messages per page]

Search this forum
Printer friendly version
E-mail a link to this thread