MuskieFIRST | Question for 621fs owners » Muskie Boats and Motors

Muskie Discussion Forums

You are logged in as a guest. ( logon | register )

Moderators: Slamr	View previous thread :: View next thread
Jump to page : 1 Now viewing page 1 [30 messages per page] Muskie Fishing -> Muskie Boats and Motors -> Question for 621fs owners

Message Subject: Question for 621fs owners

tallywacker

Posted 4/20/2016 9:30 PM (#814653)
Subject: Question for 621fs owners

Posts: 21

I just bought a used 2015 621fs with a 300 g2 and a 15hp evinrude H.O. kicker mounted on the drivers side. On passenger side in the back is a 12' Talon. First time out it was leaning torwards the drivers side just sitting still in water and when first on plane and coming off of plane. when I would trim up it would even it out the more I trimmed. does anybody else have this problem? is the kicker to heavy? Kicker on the wrong side? Note we had no gear in the boat, and driver and passenger where close to the same weight. I noticed it wright away and was disappointed, hopefully I can fix this. Thanks in advance for the help

fastcast2

Posted 4/21/2016 7:23 AM (#814673 - in reply to #814653)
Subject: RE: Question for 621fs owners

Posts: 347

Location: eagle river,wis

this is the design of the FS hull.They had to move the gas tank forward and it changed the handling of the boat.I had the same problem but lowered the motor to the lowest hole position and changed the prop to a 4 blade and it helped a lot.You have to find a partner that weighs alot to balance the boat out.Just kidding,but it is so sensitive that someone in the boat with you can move around and change the lean of the boat.I wish they would have left to VS model alone.
jeff

my kicker is on the passenger side

Edited by fastcast2 4/21/2016 7:24 AM

Jump to page : 1
Now viewing page 1 [30 messages per page]

Search this forum
Printer friendly version
E-mail a link to this thread