Muskie Discussion Forums
| ||
Moderators: Slamr | View previous thread :: View next thread |
Jump to page : 1 Now viewing page 1 [30 messages per page] Muskie Fishing -> Muskie Boats and Motors -> Helix 5 GPS/Sonar |
Message Subject: Helix 5 GPS/Sonar | |||
muskyroller |
| ||
Posts: 1039 Location: North St. Paul, MN | Just acquired a Helix 5 GPS/Sonar (not the side imaging, unfortunately) that came with the boat I purchased. Just looking for some idea on how you like/how to use the GPS piece of this equipment. The youtube stuff I found focused on the SI, but my unit doesn't have that. This is my first GPS, so any tips and tricks would be great appreciated. Thanks, Steve | ||
dfkiii |
| ||
Location: Sawyer County, WI | I have a Helix 5 and based on a summer's worth I using it, I like it just fine. My only regret is that I didn't wait for the Helix 7 to come out. I use the GPS primarily for avoiding underwater obstacles and marking structure and spots where I've moved fish. You can download a manual from the Humminbird webwsite for details on GPS usage. | ||
muskyroller |
| ||
Posts: 1039 Location: North St. Paul, MN | Good little "nugget" about the download from the website. Exactly the kind of info I'm looking for...thank you. | ||
CASTING55 |
| ||
Posts: 968 Location: N.FIB | I have the helix 5DI and like it but it`s pretty small compared to others,you might want to put it on the front by the troller and buy a bigger size unit to go on the console | ||
muskyroller |
| ||
Posts: 1039 Location: North St. Paul, MN | Haha...forgot to mention, it's on my 14ft jon boat. It'll sit back by me when running the outboard. Not sure where I'm going to place the Trolling Motor. If I run the TM off the back, it won't be a problem. I have a little portable HB that will work if I run the TM up front. | ||
jaultman |
| ||
Posts: 1828 | One thing I'll add - if you're not satisfied with the down imaging, start messing with the transducer pitch. It has toothed washers that allow a great variety of angles, but there's two stages of adjustment that just take a little time to understand. You'll see what I mean when you go to install it. Anyway, I had to adjust mine even after doing it "by the book". And when I did, my down imaging worked much better. If you visualize the down imaging sound wave pattern, it makes sense why the pitch is so critical. Not so critical for the standard sonar cone-shaped pattern. | ||
sworrall |
| ||
Posts: 32883 Location: Rhinelander, Wisconsin | jaultman - 1/12/2016 2:21 PM One thing I'll add - if you're not satisfied with the down imaging, start messing with the transducer pitch. It has toothed washers that allow a great variety of angles, but there's two stages of adjustment that just take a little time to understand. You'll see what I mean when you go to install it. Anyway, I had to adjust mine even after doing it "by the book". And when I did, my down imaging worked much better. If you visualize the down imaging sound wave pattern, it makes sense why the pitch is so critical. Not so critical for the standard sonar cone-shaped pattern. GREAT tip... | ||
Nershi |
| ||
Location: MN | The depth highlight feature is awesome. You can use it to avoid obstacles, easily find structure and highlight the depths you are moving fish in or highlight depths where the weed line is. If you fish lakes, rivers or reservoirs with fluctuating water levels I'd suggest learning the feature to adjust the map for water levels. I'd read the online manual and you should be pretty set. One feature I do not like is waypoint decluttering which I turn off. | ||
Jump to page : 1 Now viewing page 1 [30 messages per page] |
Search this forum Printer friendly version E-mail a link to this thread |
Copyright © 2024 OutdoorsFIRST Media |