Muskie Discussion Forums

Forums | Calendars | Albums | Quotes | Language | Blogs Search | Statistics | User Listing
You are logged in as a guest. ( logon | register )
Posting a reply to: Re: Battery issues

Back
Muskie Fishing -> Muskie Boats and Motors
Guest name
Subject
Message

Emoticons
HTML: Yes
Anonymous: Yes
MBBS Code: Yes


 Disable HTML
Post anonymously
Enable emoticons



hi


You are replying to:
NPike
Posted 7/7/2019 2:02 PM (#941889 - in reply to #941870)
Subject: Re: Battery issues




Posts: 612


Sudszee - 7/6/2019 8:21 PM

If you have a multimeter, put the leads on the posts. Should have at least 12.4 volts when fully charged .

~ 12.4 or so once it sets for a bit. Directly after changing may be closer 13 Vdc. But the concern is that if the terminal voltage drops much below 12 Vdc it can't turn over the motor. As for a deep cell battery needed for lights, fishfinder, trolling motor they can still run as the battery gets down to ~ 10 VDC. Good luck.

(Delete all cookies set by this site)