Muskie Discussion Forums

Forums | Calendars | Albums | Quotes | Language | Blogs Search | Statistics | User Listing
You are logged in as a guest. ( logon | register )
Posting a reply to: Re: Gas

Back
Muskie Fishing -> Muskie Boats and Motors
Guest name
Subject
Message

Emoticons
HTML: Yes
Anonymous: Yes
MBBS Code: Yes


Disable HTML
Post anonymously
Enable emoticons



hi


You are replying to:
Jerry Newman
Posted 3/27/2019 11:15 AM (#933915 - in reply to #933868)
Subject: Re: Gas




Location: 31
Yes, well stated as always Steve! As you know the E10s ethanol is a potent solvent. However, with today's blended fuels… for all I know the E0 I’ve been using (mostly from shell), has some type of additive that works along the same lines to "clean your engine". I'd guess that I'm in a very low percentage here having only used the E0 in my current boat, so most reading this probably do not need to be that concerned about it.

As an aside: I'm pretty sure that a load of bad resort gas cost me a motor in the late 80s while fishing from the Angle LOTW area. I can also remember having to fill my boat up with their 5 gallon cans from the resort in Moore Bay in the early 90s because they did not have a storage tank. I didn't know enough about using a water separator filter at the time but remember being so nervous about those 5 gallon cans... I was changing out a special inline glass filter I had installed just before the motor like crazy. So yeah agree that carrying extra fuel and water separator filters is simply good due diligence while we travel about.

Steve, this is probably not said often enough; I think you are an awesome asset to M1st! Thanks again!


Edited by Jerry Newman 3/27/2019 2:13 PM

(Delete all cookies set by this site)