|
Posts: 77
| Long story short (no pun intended), the boat had a short and melted pretty much everything. Either bad battery or bad ground is what they are saying.
I have a 597ci now on the dash. I figure now is the time to run wire for new electronics since they are replacing: switch, gauges, boat harness, engine harness etc.
The shop told me they don't suggest a deep cycle for the starting motor battery. Trouble is, I'd like to run a Helix 10 (Gen1) and a Helix 7 CHIRP G2N on the dash, along with moving the 597ci to the bow. Is a regular battery going to be able to handle that?
Will the Helix 10 Gen1 network with a Helix 7 CHIRP G2N on the dash with one transducer? What options will "share" with each other? I've found so many conflicting opinions.
Thanks. | |
|
