Post a message

Muskie Discussion Forums

Search | Statistics | User Listing

You are logged in as a guest. ( logon | register )

Posting a reply to: RE: Garage depth - ranger 619/620

Muskie Fishing -> Muskie Boats and Motors

You are replying to:

sjb42

Posted 1/25/2017 10:52 AM (#847521 - in reply to #847124)
Subject: RE: Garage depth - ranger 619/620

Posts: 84

My garage is 24ft deep as is most garages built. Best to measure the garage you want to put a 619 or 620 in to be sure what your working with. I have a 2008 620vs Ranger with a fold away tongue, Evinrude 250HO outboard with a 8 inch jackplate and a Minnkota EM 101 trolling motor that sticks out 9 inches behind the cavitation plate . I have a 3 stall garage the wife uses the single side for her suv and I use the 2 stall side for the boat. It fits at a angle with a few inches to spare. One of best things they ever did was to put folding tongues on trailers or a lot of guys could not get the length of boat they wanted because of their garage depth. Also I move back my bow mount trolling motor and I lower the big outboard and kicker outboard down and turn it so I can shut the garage door. Measure the boat you want to put in the garage and see exactly how long the boat is, because you know all boats are different.