Posts: 229
Location: Tinley Park, IL | sworrall - 5/23/2016 10:14 AM
Look at the plug burn bar and take the panel off to inspect the wiring.
Steve- I have 2 batteries that I connected in series with a jumper cable and I then I hooked up the 24 V batteries (red/blue and blk/blue) and left the 12 V wires in the battery compartment alone. With the 12/24 V Marinco plug/receptacle, am I supposed to hook up all 4 battery wires and send them to the receptacle and then does the plug take the 12 V from each battery and place them in series? I read this is the case on another forum. Marinco doesn't have these instruction on their website. I don't want to start experimenting and burn something up. Thanks. |
