|
Posts: 1901
Location: MN | Turns out I do have two bilge pumps, and two switches on the dash, but both are "manual". So I replaced one with an auto pump with built in float switch. It has 3 wires, one is black and goes to neg on the battery. The other two are positive and go to a three way switch, one for manual one for auto setting. My question is what does the 3 way switch look like on the back - does it have 3 connection points and I would run a wire from pos post of battery, to fuse, then to the middle or off terminal on the switch and the two positive leads from the pump to the other two terminals on the switch? | |
|