Posts: 1460
Location: Kronenwetter, WI | You have to take the top of the head unit off first. Make sure the motor is pointing straight ahead. Then you will see the cables going around a plastic part tht sits on the gears that turn the motor. Carefully loosen the tension screw on the front of the foot pedal. Then lift the plastic part with the cables going around it off the gears and rotate it one way or the other ( you will notice the pedal move as you rotate it) and then place it back onto the gear head. Do this so that the pedal is flat and the motor is pointing straight. One you have it, tighten the tensions screw, and replace the head cover. That's it. |
