Posts: 109
Location: Wisconsin River | I agree. pushing the outboard up and down is cheap if you can handle that. The shops in my area dont like to demo props. If you put one on you pretty much own it. That can get expensive. With things starting to lock up here, the tweeking may have to wait till spring. I will be keeping an eye out for a prop that has a good reputation with this hull. So far it sounds like the Raker works well and a 4 blade will not enhance handling, may reduce speed over a 3 blade. Any other feedback is welcome or advice on props & spacer combinations that will work on this motor. PM me if you have a prop you want too sell. |
