Muskie Discussion Forums

Forums | Calendars | Albums | Quotes | Language | Blogs Search | Statistics | User Listing
You are logged in as a guest. ( logon | register )
Posting a reply to: Re: Water Pressure Gauge Problem

Back
Muskie Fishing -> Muskie Boats and Motors
Guest name
Subject
Message

Emoticons
HTML: Yes
Anonymous: Yes
MBBS Code: Yes


 Disable HTML
Post anonymously
Enable emoticons



hi


You are replying to:
Makintrax73
Posted 9/17/2012 3:34 PM (#585267 - in reply to #585234)
Subject: Re: Water Pressure Gauge Problem





Posts: 156


Had a similar problem with a speedo except that it was some woody debris sucked in. I used an air compressor with a blower attachment (ie "blow gun" ), and used the regulator to bump the pressure down to about 20 PSI so as not to blow the line up. You may have a connection back by the motor that you can unhook without digging under the dash.

Obviously you need to be extremely careful at this point to make sure the impeller is pumping sufficient water and didn't get trashed by running sand through it.

(Delete all cookies set by this site)