Muskie Discussion Forums

Forums | Calendars | Albums | Quotes | Language | Blogs Search | Statistics | User Listing
You are logged in as a guest. ( logon | register )
Posting a reply to: Re: Trailer Wires

Back
Muskie Fishing -> Muskie Boats and Motors
Guest name
Subject
Message

Emoticons
HTML: Yes
Anonymous: Yes
MBBS Code: Yes


 Disable HTML
Post anonymously
Enable emoticons



hi


You are replying to:
Farmer Rick
Posted 5/7/2012 3:58 PM (#558377 - in reply to #558231)
Subject: Re: Trailer Wires





Location: Not far enough north!		If you have a seven pin Plug on your truck then they make an adapter that goes to a straight four and a straight five. If the breaks are hudraulic then they work all the time. Like steve said the wire is to turn them off when you are backing. I got mine at NAPA. If your truck only has a 4 flat you will need to wire a new plug in or just use the stopper on the trailer that prevents plunger from applying breaks. I would talk to an auto parts store or dealership before cutting wires on the back end. They probably will have a wiring harness that will plug right in somewhere under the truck back by the tail lights...

Rick

Edited by Farmer Rick 5/7/2012 4:04 PM

(Delete all cookies set by this site)