Post a message

Muskie Discussion Forums

Search | Statistics | User Listing

You are logged in as a guest. ( logon | register )

Posting a reply to: Re: Humminbird side imaging with esox mag

Muskie Fishing -> Muskie Boats and Motors

You are replying to:

ttrap

Posted 7/6/2011 10:50 AM (#505928 - in reply to #505842)
Subject: Re: Humminbird side imaging with esox mag

Posts: 279

Well from where it is i don't think your going to get 2d readings while on plane anyway. So if you move it lower to clear the stuff it will not make the 2d reading any worse in my mind and you will get 2d readings at a higher speed maybe not at full speed. If you don't need the 2d readings at high speed then keep it up. The reason people keep it up is so they don't break it off. I have the same boat and I use lowrance lss-1 transducer and the regular skimmer transducer and mounted both of them on the right side in between the two bunks i get "side scan" up to about 15mph. I will post a pick of my ducers if you want even though they are different brand.

Edited by ttrap 7/6/2011 10:56 AM