Muskie Discussion Forums

Forums | Calendars | Albums | Quotes | Language | Blogs Search | Statistics | User Listing
You are logged in as a guest. ( logon | register )
Posting a reply to: Re: Yet another propping question

Back
Muskie Fishing -> Muskie Boats and Motors
Guest name
Subject
Message

Emoticons
HTML: Yes
Anonymous: Yes
MBBS Code: Yes


 Disable HTML
Post anonymously
Enable emoticons



hi


You are replying to:
scares_fish
Posted 6/5/2010 9:18 PM (#444116 - in reply to #444111)
Subject: Re: Yet another propping question




Posts: 25


I'm going through the same thing right now with my 115 etec. The cheapest place to start is to make sure your motor is at the right height on the transom. If it's similar to other motors you want your anti cavitation plate riding a little above the water at WOT when properly trimmed. This is easy to do yourself in your garage with your trailer. Took me about 15 minutes to raise mine 2 holes. Looks like your motor wants to be about 5700rpm at WOT so you might have to change props once you get your height set, but I would work on proper height first and go from there.

(Delete all cookies set by this site)