|
Posts: 255
| Steve,
Sounds good. Yes, when I ventilated in the turn, I simply trimmed down and all was good. I rarely need to make tight turns at high speeds. If I do, I will just trim down slightly and all is good. I spoke with a prop shop guy here locally that is very knowledgeable and he said the exact same thing you did. Since I will run with 2 guys most of the time, the RPMs will come down slightly and I will run perfectly where I should. As for the prop, he did not say a steel prop would help all that much. I am going to bring him my aluminum prop and he is going to modify it slightly on the cup to help a little more but that is it. Thanks for all the help. | |
|
