|
| I have a Shore Land'r trailer under my Pro-v and did this. If you loosen the 3 winch bracket bolts and take off the bolt at the "Y" of the trailer you can slide out your current swing tongue. Then measue the distance that you need (it looks like 3-4 inches between the winch bracket and jack and 4-5 inches in front of jack and swing. Cut the back area with the angle with a band saw at the same angle, drill the new hole for the "y" area, paint the new cut and you have a boat that fits the garage.
I cut about 8 inches from my trailer and the swing is now directly below the front tip of my boat.
Hope that this helps,
Ryan | |
|
