Posts: 516
Location: Kildeer, IL | Use the mix and pour stuff sold at marine shops. It is much easier to work with. Cover a small sheet of plywood with a garbage bag. Make sure the plywood is big enough to fully cover both stringers. Then Pour the foam between the stingers, and place the plywood over the stingers. Stand on the plywood for 3 or 4 minutes. This will stop the foam from expanding over your stingers. This also ensures that the foam will expand evenly from top to bottom. If you start from the back of the boat and work your way forward, this will ensure that it expands evenly front to back.
See this thread for how I rebuilt my Tuffy.
http://muskie.outdoorsfirst.com/board/forums/thread-view.asp?tid=38...
Edited by setme31 6/12/2009 4:31 PM
|
