Posts: 32885
Location: Rhinelander, Wisconsin | Treated plywood and resin won't work well, the resin won't adhere to it. I'd use 1/2" cdx plywood, completely coat the pre-cut piece of floor with resin both side and heavily on the end grain before installing. If you use treated, make sure the end grain is sealed with silicone sealant and make sure the carpet glue you are going to use will adhere.
Once you get the carpet off you will be able to tell what's up; it's possible you will only need to patch in a piece, I can help you if you'd like to call when you are ready. 715.362.1760. |
