Posts: 304
Location: Lino Lakes, MN | VMS and others,
Guy's there has been some great info under the Muskie Boats and Motors.
My problem is I have already fixed my Aluminum prop twice and I am looking to upgrade to a Stainless Steel Prop.
Currently I have a stock Yamaha Aluminum 13X19 K prop and I am running at 5900 rpm at WOT.
Which prop would be recommended. I don't know what mounting hole my motor is mounted in right now. I do get cavitation when I make turns while running at 80% throttle.
I do have a slight bend in one of the repaired blades but not much. I am only looking to drop RPM's by 200-300.
Thanks
Steve
P.S. is anyone currently running the same rig? What props / rpm / performance are you getting out of it?
|
