Muskie Discussion Forums

Forums | Calendars | Albums | Quotes | Language | Blogs Search | Statistics | User Listing
You are logged in as a guest. ( logon | register )
Posting a reply to: Re: navionics chip

Back
Muskie Fishing -> Muskie Boats and Motors
Guest name
Subject
Message

Emoticons
HTML: Yes
Anonymous: Yes
MBBS Code: Yes


Disable HTML
Post anonymously
Enable emoticons



hi


You are replying to:
TJ DeVoe
Posted 7/4/2008 10:06 PM (#324995 - in reply to #324982)
Subject: Re: navionics chip




Posts: 2323


Location: Stevens Point, WI
Schuler - 7/4/2008 4:52 PM

As far as I know you will still need 2 chips if they are networked. You can share waypoints, but not navionics data.


Nope, not on the newer models you don't. This was recently changed so that you could see navionics data on both units. I have two Lowrance X-27's I bought this spring and I have them networked. I have a navionics chip in my console one and share all information from my console unit to my bow unit and then from my bow unit back to my console unit. I can put a waypoint on my bow unit without the chip and see it on my console unit.

I assure you that this is possible, I've been doing this all spring and the past two nights on one of my favorite local lakes.

(Delete all cookies set by this site)