Posts: 32886
Location: Rhinelander, Wisconsin | The new Mercury Marine SmartCraft Gauges are truely "smart".
SmartCraft Gauges are made to be a perfect match for the OptiMax Outboards.
Clear up that crowded gauge cluster and make engine monitoring much easier.
You can now set a target boat speed or engine RPM and the Troll Control™ will
automatically maintain the idle engine RPM up to 1,000RPM in any kind of water!
Dozens of functions can now be monitored in conjunction with the
exclusive Engine Gaurdian™ system which monitors over 40 sensors and actuators!
Smart Tach displays RPM, voltage,water pressure, engine temperature, engine hours,
trim, fuel flow rate in gallons or liters per hour, includes buttons for Troll Control™ and
reads in both LCD digital and analog.
Smart Speedo displays boat information including boat speed in MPH, kilometers or nautical
miles per hour, clock, fuel level in gallons or liters, oil level, mpg (average & trip),
current range, gps course, water & air temp, engine synchronizer, Troll Control™ for speed,
Reads in both analog and digital LCD.
---------------------------------------------------------------------------------------------------
The Tach and Speedo are about $750 plus installation/calibration, and more for the full array:
http://www.mercurymarine.com/otherproducts/smartcraft/smartcraftata...
I've seen the 2008 price for the full array at $1500 installed and higher, but if one shops around it can be done for quite a bit less.
Here's a price of $666.65 for the Tach and Speedo uninstalled.
http://www.outdrives.com/mergauges/smartcraft.html
|
