|
Posts: 5874
| These don't sound like Bearing Buddies. Hopefully not.
They sound like the EZ-Lube hubs. These hubs have a drilled axle that the grease goes down, and is returned through the rear bearing out the front. There is a metal end cap on these that must be removed to get at the retainer and nut. Remove, pack bearings, and reinstall with new double lip seal, just like traditional bearings. When adding grease throughout the summer, rotate the wheel to add grease evenly.
Edited by Shep 12/3/2007 1:45 PM
| |
|
