|
Posts: 814
| Last weekend I updated my units..(110c & 334c). 334 works fine 110c is giving me all kinds of weird feedback. Before I installed the updates the water column was always clear of debris and interference, baitfish showed up as baitfish and fish were clear and easy to pick out. And when I ran the motor wide open there was no screen interference at all. Now I have so much interference that the screen almost blacks out when driving full speed...all kinds of black blobs all over the screen through out the water column. Also in under 20 fow the debris is really bad its showing up about 8 feet or so off of the bottom no matter what depth I am in. and makes reading difficult....Talked to lowrance after a 35 minute wait and they have heard nothing of this and told me to play with the unit.
I run my sensitivity on 70%, chart speed 100% and ping speed at 100%
surface clarity on low and noise interference on low. BEFORE THE UPDATES!
NOW I am running sens. on 45% and surface clarity on high and noise interference on high, and its helping a little but now bottom detail and baitfish detail suffers to the point where I almost don't have a bottom.
What's Wrong
any help would be appreciated. thanks Mike | |
|
