Posts: 578
Location: Sheboygan Falls, WI | If it is a flashing light it is telling you that you have enough hours for an oil change. Simple to make it stop blinking.
1) Turn motor off.
2) Pull your kill switch cord off of the red knob.
3) Turn key to turn power on, but not turn motor over.
4) Pull the red kill switch button 3 times.
5) I believe it will beep and the light will stop flashing.
6) Remember to replace your kill switch cord.
7) Start motor and go fish.
If the light stays on and does not flash, take it in for service work.
Chuck |
