Muskie Discussion Forums

Forums | Calendars | Albums | Quotes | Language | Blogs Search | Statistics | User Listing
You are logged in as a guest. ( logon | register )
Posting a reply to: RE: transducer cord ?

Back
Muskie Fishing -> Muskie Boats and Motors
Guest name
Subject
Message

Emoticons
HTML: Yes
Anonymous: Yes
MBBS Code: Yes


 Disable HTML
Post anonymously
Enable emoticons



hi


You are replying to:
mreiter
Posted 8/5/2005 8:10 AM (#155810 - in reply to #155718)
Subject: RE: transducer cord ?





Posts: 333


Location: menasha wi 54952		It is possible and it will work. It is not really just wire.

Most transducer cords are shielded cable. When you cut the cord you will see a wire that runs down the center and a fine mesh that rides around the outside of the shield. If you strip back the outer cover far enough and cut the mesh you will be able to twist it and basically make a solid wire out of it. Do the same thing to the other cord and splice with a good water tight seal.

Good luck!!!

MR

(Delete all cookies set by this site)