Muskie Discussion Forums

Forums | Calendars | Albums | Quotes | Language | Blogs Search | Statistics | User Listing
You are logged in as a guest. ( logon | register )
Posting a reply to: RE: Trailer Light Out HELP

Back
Muskie Fishing -> Muskie Boats and Motors
Guest name
Subject
Message

Emoticons
HTML: Yes
Anonymous: Yes
MBBS Code: Yes


Disable HTML
Post anonymously
Enable emoticons



hi


You are replying to:
Fisherben
Posted 7/11/2005 2:46 AM (#153134 - in reply to #152665)
Subject: RE: Trailer Light Out HELP


Ballcap did you get this fixed yet? My lights slide out of the bottom of the lense, there's a tab that says lift. Pull the tab towards you and slide the lights down. Also on my trailer all of the wiring was done with 2 prong conectors. The four prong splits in the tongue to two two prongs and one grond.These wires run to the tail light where there is another 2 prong connector thats wired to the lights. There are two 1/4-20 carriage bolts that hold the lense on the trailer, you need to remove the lense to access the end connectors.If you have side markers on the fenders this wire shoots forward from the tail light on the wire in the middle of the trailer. The ground for the side marker runs from the side marker to the taillight.Hope this helps.

Ben

(Delete all cookies set by this site)