Muskie Discussion Forums

Forums | Calendars | Albums | Quotes | Language | Blogs Search | Statistics | User Listing
You are logged in as a guest. ( logon | register )
Posting a reply to: Re: Hummingbird electronics ??

Back
Muskie Fishing -> Muskie Boats and Motors
Guest name
Subject
Message

Emoticons
HTML: Yes
Anonymous: Yes
MBBS Code: Yes


Disable HTML
Post anonymously
Enable emoticons



hi


You are replying to:
sworrall
Posted 5/18/2023 2:42 PM (#1020859 - in reply to #1020850)
Subject: Re: Hummingbird electronics ??





Posts: 32801


Location: Rhinelander, Wisconsin
I believe Helix G3, Solix, and Apex units will share information.

Edit:
When networked together via Ethernet, HELIX and SOLIX or HELIX and APEX models will share:

Waypoints
i-Pilot Link information and control
360 Imaging (note that HELIX and SOLIX will not share MEGA 360 with each other)
Humminbird CHIRP radar
MEGA Live Imaging (see notes below)
Bluetooth Talon control (see notes below)
NMEA 2000 network information (see notes below)

Additional Ethernet sharing notes:

Depending on technology built into each networked fish finder, some sonar images, such as MEGA Live or MEGA 360, may not be shared if unable to be supported by your unit’s software. Ensure that you are running the latest software by finding updates here.
If both HELIX and SOLIX are on the network and need control of Minn Kota's Bluetooth TALONs then at least one SOLIX and one HELIX G2N/G3N must be paired to the Bluetooth TALON at the same time.
If both HELIX and SOLIX are on the network and need to view NMEA2000 data, then at least one SOLIX and one HELIX G2N/G3N must be connected to the NMEA 2000 network. The HELIX G2N/G3N would be connected via the AS ETH NMEA2K, NMEA2000 Gateway. The AS ETH NMEA2K is not compatible with HELIX G4N models, and G4N models do not share NMEA2000 data over network.
While an ONIX and SOLIX can network with each other, they must be on the same software version. Any SOLIX over software version 4.020 or higher will not network with an ONIX. SOLIX software version 3.350 is the last version compatible with ONIX.




(Delete all cookies set by this site)