sworrall - 8/9/2018 9:01 PM

What does the saddle on the trailer end of the transom saver attach to?
[I had to cut the transom saver down about 10 inches to maintain an average towing height on the 90. I removed the "stud" end of the transom saver and welded a 12 in piece of 1 in flat stock to it. You must drill a center hole in the flat stock large enough to fit the cut of stud. after welding the flat stock to the stud it is easy to bund it into the "U" shape needed to fit the roller. After you get the fit simply cut off the extra stock on each end. The whole modification to me 30 min. Hope this helps/QUOTE]