Posts: 546
Location: MN | partlycloudy - 6/28/2018 9:39 PM
You can hook a DI to the Terrova it's just not a DI transducer in the troller. Best bang for the buck is get the chirp for the bow with the high speed transducer. mount both transducers on transom with Y cable and link everything. You'll get high speed at dash while running, SI and DI at slow speeds and have option of all 3 at bow. Many videos on line on how to do this. Bill
Unfortunately you can't rig the DI to US2, you need an external transducer. DI GPS units get interference when run through the US2 transducer. It has nothing to do with not getting DI, but interference comes on 2D sonar, because of the way they pick up sonar signal.
CHIRP/GPS and SI/GPS units through US2 only.
https://www.minnkotamotors.com/learn/technology/trolling-motors/univ...
The Y-cable should be hooked to a high-speed transducer and the MEGA SI/DI transducer at the transom of the boat. If you network the units via ethernet, you can share these views between the units by changing your source source in your network setup menu.
Edited by mtcook16 6/29/2018 1:57 PM
(9 M SIDB Y configuration.png)
Attachments
----------------
 9 M SIDB Y configuration.png (110KB - 383 downloads)
|
