Post a message

Muskie Discussion Forums

Search | Statistics | User Listing

You are logged in as a guest. ( logon | register )

Posting a reply to: Re: Terrova upgrade, I Pilot link with Humminbird

Muskie Fishing -> Muskie Boats and Motors

Guest name

Subject

Message

Emoticons

[QUOTE]mtcook16 - 6/6/2017  12:40 PM

2. In order to enable follow the contour, your LakeMaster card will need to show the i-Pilot Link logo as shown in the link. https://www.humminbird.com/Products/HCMN7/

3. http://precisionsonar.com/products/   (SCROLL TO BOTTOM)
 OR  http://www.crappie.com/crappie/fishing-electronics-and-photography/318405-minn-kota-ulterra-external-transducer/[/QUOTE]

HTML: Yes
Anonymous: Yes
MBBS Code: Yes

Disable HTML
Post anonymously
Enable emoticons

You are replying to:

mtcook16

Posted 6/6/2017 12:40 PM (#864148 - in reply to #864069)
Subject: Re: Terrova upgrade, I Pilot link with Humminbird

Posts: 546

Location: MN

1. Yes, they are compatible units to run IPL. To network the units and have i-pilot Link on both, you will need a 5 port ethernet switch, (AS ETH 5PXG) and ethernet cables from each unit to the switch and the motor. Since the motor will come with one and you already have one, you will need only one more cable to complete the network. Make sure to lay it out on paper first to ensure you buy the length of ethernet cable you need (2', 10', 15', 20' or 30'). Since these models have a dedicated ethernet port on the back of them, you will not need AS EC QDE (ethernet adapters) like you would when networking Helix units.
https://www.minnkotamotors.com/community.aspx?pageid=3805

2. In order to enable follow the contour, your LakeMaster card will need to show the i-Pilot Link logo as shown in the link. https://www.humminbird.com/Products/HCMN7/

3. http://precisionsonar.com/products/ (SCROLL TO BOTTOM)
OR http://www.crappie.com/crappie/fishing-electronics-and-photography/...