Muskie Discussion Forums

Forums | Calendars | Albums | Quotes | Language | Blogs Search | Statistics | User Listing
You are logged in as a guest. ( logon | register )
Posting a reply to: RE: LED Lighting

Back
Muskie Fishing -> Muskie Boats and Motors
Guest name
Subject
Message

Emoticons
HTML: Yes
Anonymous: Yes
MBBS Code: Yes


Disable HTML
Post anonymously
Enable emoticons



hi


You are replying to:
ulbian
Posted 4/30/2017 11:19 PM (#860215 - in reply to #859626)
Subject: RE: LED Lighting




Posts: 1168


I ran strips on the outside down the entire length of my boat. Mine are RGB color changing lights ran off of a wireless remote. The entire set up (two strips of lights, connectors, etc.) were pretty darn cheap and ordered it all off of Amazon. I think the company was SuperNight or something like that.

You don't need "waterproof" LEDs because they won't be submerged. You would be wise getting "weatherproof" LEDs though. The lights are encapsulated in silicone.

Since LEDs draw very, very little juice you don't have to worry about killing your batteries so an extra battery isn't necessary. If you get the same type that are run off of a controller you can turn them on and off with that and there is no need to wire in an extra accessory switch. Mine are spliced into the wiring for a 12v accessory plug in the bow and I simply turn them on and off with the remote.

It's pretty funky when I fire them up and make them flash or fade through different color cycles. A buddy of mine said it looks like a space ship landed on the lake and his dad said it looked more like a floating Vegas casino in the dark. I also have a controller that can plug directly in to my radio so the colors change and pulse along with the music that is coming through the speakers.

The biggest tip I can give is before installation have double sided carpet tape on hand or some other good weatherproof tape. The adhesive backing that is on lights like this sucks. It's fine if you are only sticking on a 10 inch strip but anything beyond that and your lights will start unsticking before you get to test them out.

(Delete all cookies set by this site)