Muskie Discussion Forums

Forums | Calendars | Albums | Quotes | Language | Blogs Search | Statistics | User Listing
You are logged in as a guest. ( logon | register )
Posting a reply to: Re: 2016 FS621 and newer FYI

Back
Muskie Fishing -> Muskie Boats and Motors
Guest name
Subject
Message

Emoticons
HTML: Yes
Anonymous: Yes
MBBS Code: Yes


Disable HTML
Post anonymously
Enable emoticons



hi


You are replying to:
elkslayer
Posted 3/23/2017 4:29 PM (#854675 - in reply to #854141)
Subject: Re: 2016 FS621 and newer FYI





Posts: 29


Location: Romeo Michigan
Yes and on my Yamahas it's tapped both ways yo it's shortest possible length. The bar needs a to be shortened such that the motors align properly. The connection point on the kicker has a small angled bracket where the bar connects with 2x small adjustment holes. Basically until they manufacture a smaller bar there needed to be an extra hole or 2 on the original Yamaha bracket, thus was fabricated. It's in shop or I'd attach a pic.

Just know it's an issue if you buy Yamaha on your new 621FS, and make sure it's dealt with at the factory. I am certain most folks haven't even noticed it as many of my buddy's thought I was crazy when I said they were slightly misaligned. I too thought i could easily adjust but both adjustments were already set to their smallest configuration.

Cheers

Jake


(Delete all cookies set by this site)