Posts: 410
Location: With my son on the water | First: Steve Thanks again for the help.
Just an FYI to others that may have this issue either now or in the future. First I put masking tape on the floor to outline the area of concern. I then made a sample out of cardboard about the same size. I then did a test run on my sample so I could identify where to insert the syringe and get an idea how much glue to insert. I would insert the syringe, then move it parallel to the surface and rotate it 360 degrees. I learned that 1.5 ml or CC (can't remember and I tossed the syringe) was a nice amount to leave a nice bead of contact cement but to much that it would come back out the hole.
I applied this same process to the carpet in the boat and it is like new, maybe better.
I am a very happy guy.  |
