Muskie Discussion Forums

Forums | Calendars | Albums | Quotes | Language | Blogs Search | Statistics | User Listing
You are logged in as a guest. ( logon | register )
Posting a reply to: RE: Compartment latches

Back
Muskie Fishing -> Muskie Boats and Motors
Guest name
Subject
Message

Emoticons
HTML: Yes
Anonymous: Yes
MBBS Code: Yes


Disable HTML
Post anonymously
Enable emoticons



hi


You are replying to:
esoxaddict
Posted 3/11/2016 2:11 PM (#809349 - in reply to #809341)
Subject: RE: Compartment latches





Posts: 8780


There are two o-rings that go on the piece on the right, which fits into the piece in the center. The purpose of these is to seal that area so water does not leak through the latch and into the compartments. What often happens is that over time, dirt and sand work their way down into the latch making it impossible to turn. Usually a good cleaning and a bit of silicone grease is all you need to get the latches working again. In my case, the o-rings had disintegrated over time and came out in pieces. Everything I found at the hardware store was fine as far as inside diameter, but they were all too thick for the pieces to fit back together. If I had one o-ring still intact, matching them up would be simple, but they all came out in bits.

The folks at Ranger said they were Perko latches. The fine folks at Perko assured me that those were definitely NOT Perko latches, because Perko latches do not have o-rings. Nothing in the Perko inventory matches these, so I am pretty sure they were right.

The only thing I've found that looks pretty close to these is a company called T-H Marine. The folks at T-H Marine do not answer their phone, return phone calls, or answer e-mails, so I'm back to square one.

Edited by esoxaddict 3/11/2016 2:28 PM



Zoom - | Zoom 100% | Zoom + | Expand / Contract | Open New window
Click to expand / contract the width of this image
(IMG_0765.JPG)



Attachments
----------------
Attachments IMG_0765.JPG (134KB - 382 downloads)

(Delete all cookies set by this site)