Posts: 2687
Location: Hayward, WI | I tried releasing tension from the bow hook, and there was no change in how the boat sat on the bunks. Looking at the bunks with the boat off the trailer, they don't seem warped. If anything the long boards seem slightly sagged in the middle between the bunk supports, like bunk boards often look.
Any other ideas of what I can check? The swiveling brackets seem to be adjusted to the same angle. The right center bunk very nearly touches the boat right at the transom, while the left center bunk has a significant gap as shown by my pointer finger in the gap.
Thanks,
Tucker
P.S. The trailer has been washed since those pictures! 
Edited by curleytail 5/27/2015 5:43 PM
|
