Post a message

Muskie Discussion Forums

Search | Statistics | User Listing

You are logged in as a guest. ( logon | register )

Posting a reply to: RE: HDS Networking

Muskie Fishing -> Muskie Boats and Motors

Guest name

Subject

Message

Emoticons

HTML: Yes
Anonymous: Yes
MBBS Code: Yes

Disable HTML
Post anonymously
Enable emoticons

You are replying to:

Jerry Newman

Posted 8/2/2014 9:37 PM (#723910 - in reply to #723877)
Subject: RE: HDS Networking

Location: 31

I just crawled out from underneath my dash hooking up ethernet.

You can just hook them together with one ethernet cable, or run an ethernet cable from each unit to the LSS1 box and have structure scan available for both (There are three ethernet ports available from the LSS-1). If one of your units has 2 ethernet ports you can run the other units ethernet cable into it and then just one ethernet cable to the LSS-1 too. Ethernet is very user-friendly… as long as you have everything hooked up and powered it will work.

You may not need an expansion box too... I currently have three units and the weather module networked using the LSS-1 box with a piggyback from one of my HDS units that has two ethernet ports.