Post a message

Muskie Discussion Forums

Search | Statistics | User Listing

You are logged in as a guest. ( logon | register )

Posting a reply to: Re: Tuffy livewell issue

Muskie Fishing -> Muskie Boats and Motors

Guest name

Subject

Message

Emoticons

HTML: Yes
Anonymous: Yes
MBBS Code: Yes

Disable HTML
Post anonymously
Enable emoticons

You are replying to:

Propster

Posted 6/12/2014 7:52 PM (#715320 - in reply to #715170)
Subject: Re: Tuffy livewell issue

Posts: 1901

Location: MN

btfish, plug the overflow as the gentleman above suggests, but also plug the ones inside the LW, including the intake (from the pump) up high and the drain hole down low, and the outer one on the transom (just to the side of the main drain hole). Not sure a Tuffy is laid out the same as mine but it sounds like it is. Then you'll have guaranteed dry storage. And if you buy the right size rubber "corks", where one side is smaller than the hole and the other end is bigger, you won't need to modify them, just use as is. They won't go anywhere.

Pointer, I know I've got a minnow or three that got down my drain and is plugging up my line, so I'll have to get under my floor like you and pull the line off the pump and flush em through. I'm plugging mine up for the summer now that muskie fishing is in full force (and the walleyes get a break) but don't want them stinking up the joint!

Edited by Propster 6/12/2014 7:54 PM