Muskie Discussion Forums

Forums | Calendars | Albums | Quotes | Language | Blogs Search | Statistics | User Listing
You are logged in as a guest. ( logon | register )
Posting a reply to: RE: Battery Break-In

Back
Muskie Fishing -> Muskie Boats and Motors
Guest name
Subject
Message

Emoticons
HTML: Yes
Anonymous: Yes
MBBS Code: Yes


Disable HTML
Post anonymously
Enable emoticons



hi


You are replying to:
ESOX Maniac
Posted 3/23/2014 7:22 AM (#701399 - in reply to #701396)
Subject: RE: Battery Break-In





Posts: 2753


Location: Mauston, Wisconsin
Re. AGM's - Most can typically handle higher charger rates, however, the charger has to have temperature compensation to prevent thermal runaway at temperatures above 77F. If that happens in your boat you won't be happy camper..... You also don't want to equalize them, like you do with a wet-cell battery. Get a charger designed for AGM's. I stay at 15A as a max limit, even though you can push higher on a typical 100AH AGM. For smaller AGM's for portable fish finders, camera's etc. be very careful to not exceed ~ 20% of the AH rating.

A good rule of thumb is your charger should be rated between 5% and and 20% of the AH rating. On a typical 100AH AGM this is between 5A- 20A.

Have fun!
Al

(Delete all cookies set by this site)