Muskie Discussion Forums

Forums | Calendars | Albums | Quotes | Language | Blogs Search | Statistics | User Listing
You are logged in as a guest. ( logon | register )
Posting a reply to: Re: Frozen bilge

Back
Muskie Fishing -> Muskie Boats and Motors
Guest name
Subject
Message

Emoticons
HTML: Yes
Anonymous: Yes
MBBS Code: Yes


Disable HTML
Post anonymously
Enable emoticons



hi


You are replying to:
VMS
Posted 3/10/2014 11:36 AM (#697919 - in reply to #697901)
Subject: Re: Frozen bilge





Posts: 3480


Location: Elk River, Minnesota
Hiya,

First and foremost, get it thawwed... If you are lucky, the only damage that might be done is a cracked bilge pump as the livewell pump has an ability to somewhat drain itself as it is a separate and closed system from the bilge area itself. One thing you possibly have going for you is that if the whole bilge pump was encased in water, expansion is near impossible on the inside of the unit as air would easily transfer up through the hose and not be trapped, and water fills in everywhere. It is not quite the same as having a pipe or hose burst as the hose or pipe has nothing compressing it from the outside, thus it can expand on it's own and burst.

Worst case, I believe you will see is a replacement of the pump. Not sure how much water is in there, but I would bet your hull is probably o.k... Steve Worrall could tell you more about fiberglass hulls as he worked with Tuffy for a number of years....glass is not my forte...yet... Gotta save quite a few thousand dollars before I get to that point...

Steve

(Delete all cookies set by this site)