Muskie Discussion Forums

Forums | Calendars | Albums | Quotes | Language | Blogs Search | Statistics | User Listing
You are logged in as a guest. ( logon | register )
Posting a reply to: RE: Tuffy Rigging

Back
Muskie Fishing -> Muskie Boats and Motors
Guest name
Subject
Message

Emoticons
HTML: Yes
Anonymous: Yes
MBBS Code: Yes


 Disable HTML
Post anonymously
Enable emoticons



hi


You are replying to:
Tommy Mac
Posted 4/3/2003 8:59 PM (#65804 - in reply to #65762)
Subject: RE: Tuffy Rigging




Posts: 29


I have used the Motor Guide type rubber inserts before. In my application (bow mount on older Ranger) they worked very well. I would recomend using some Never Sieze, (available at auto parts stores) on the bolts in case removal is necessary. I had the motor off and on the boat a couple of times with no problem.

When running wires for the electronics it may be necessary to drill holes and run wires through bulk heads etc. Rig Rite makes a nifty little hole cover to hide these holes for a neat insatalation. Enjoy the new Tuffy! Good Luck.

(Delete all cookies set by this site)