Post a message

Muskie Discussion Forums

Search | Statistics | User Listing

You are logged in as a guest. ( logon | register )

Posting a reply to: RE: Boat Modefication - Casting Deck, Floor and Removal of Bench Seats

Muskie Fishing -> Muskie Boats and Motors

You are replying to:

turbine_surgeon

Posted 8/1/2012 2:34 PM (#575358 - in reply to #575281)
Subject: RE: Boat Modefication - Casting Deck, Floor and Removal of Bench Seats

As for the floor, find large pieces of cardboard and use that to make templates. Lay the templates out on the ply wood, cut it out. Fabricate some stringers to brace the floor against the hull. Attach the stringers to the plywood, and drop it into the boat. I wouldn't attempt to attach it to the hull. Messing with rivets and drilling holes in your hull is a good way to wreck a good boat. Also if you come across the weight problem, you will always be able to just pull the floor out with no damage to the boat.

Just my $.02