Post a message

Muskie Discussion Forums

Search | Statistics | User Listing

You are logged in as a guest. ( logon | register )

Posting a reply to: Re: Connecting two humminbird units...

Muskie Fishing -> Muskie Boats and Motors

You are replying to:

Plunker

Posted 6/29/2012 8:03 AM (#568225 - in reply to #568165)
Subject: Re: Connecting two humminbird units...

Posts: 307

You do not need the interlink. The ethernet will do what you want. One gps puck and one transducer.

hit menu twice go to network menu then network source setup. There should be options gps, transducer, temp etc. that you can scroll over to and down. Make sure that the check boxes are checked on. This needs to be done on your slave unit, which I assume is the 58. Both units need to be on as the one with the gps puck and transducer plugged in is the master unit. It may take a minute for the 58 to recognize that the 98 is sending an ethernet signal and give you the option of the check boxes.