Post a message

Muskie Discussion Forums

Search | Statistics | User Listing

You are logged in as a guest. ( logon | register )

Posting a reply to: RE: Adding a Lowrance LCX-111c - Stumped.

Muskie Fishing -> Muskie Boats and Motors

Guest name

Subject

Message

Emoticons

HTML: Yes
Anonymous: Yes
MBBS Code: Yes

Disable HTML
Post anonymously
Enable emoticons

You are replying to:

The Dogger

Posted 9/3/2010 7:06 AM (#457952 - in reply to #457935)
Subject: RE: Adding a Lowrance LCX-111c - Stumped.

Posts: 215

Location: Twin Cities

Have you tried it back on the bow again after you got it to work at the console?

You might want to check the voltage at each position. I believe you can do this using your 17's first to see what each one measures at each location by adding the overlay feauture of the voltage reading. ( I know with a 520 you can add the voltage for overlay)

There might be something going on with the wiring at your bow location that is providing a lower voltage. Lowrance units are sensitive to the the voltage supply and will turn off if the voltage is too low or too high.

A good document to have in general, also shows how to measure voltage: http://mikeoftulsa.zoomshare.com/files/Lowrance_Stuff/GPS_Module_No...

Edited by The Dogger 9/3/2010 10:19 AM