Posts: 208
Location: Sun Prairie, WI | Just because the batts are only 6 months old doesn't mean they are good. Have you tested them with a load tester? If it was a fuse it shouldn't work at all with or without the charger hooked up. 1st, check to make sure batteries are both taking and holding a charge. 2. check water level in batteries if they are not agm or maintenance free batts. 3. check all conections at both batteries and the wires to the pug and check the plug itself for any corrosion. 4. If all else fails take the motor to a service center and have them check it over. hope this helps its all I can think of right now. Good Luck. |
