Posts: 412
Location: Waukesha, WI | Scott, other items I'd do:
take the prop off and make sure there isn't any line or other debris wrapped around the prop shaft. 2-4 C grease that baby back up again and put 'er back together.
put biodegradable antifreeze into the livewell from the intake to make sure if there is any water in the corrugated hose it doesn't freeze. If the seem is at the bottom, I was told there's a remote chance it could crack. I also did the same with the bilge pump.
trim the motor down for storage
grease all fittings with 2-4 C
|
