Post a message

Muskie Discussion Forums

Search | Statistics | User Listing

You are logged in as a guest. ( logon | register )

Posting a reply to: Low voltage to bow Lowrance??

Muskie Fishing -> Muskie Boats and Motors

You are replying to:

schrump

Posted 10/1/2008 11:56 AM (#338765)
Subject: Low voltage to bow Lowrance??

Posts: 128

I checked all fuses, connections, battery connection etc. Unit is wired into the main harness and I traced it back to the fusebox, no issues with continuity between the two. Unit will power up with no problem but as soon as I turn on lights,use the bilge,or tilt and trim it will cut out. Reads between 8.5 and 9.5 volts on the status page when nothing else is being used. Anyone have any ideas as to what might be causing this issue? Thanks in advance.