Posts: 742
Location: Grand Rapids MN | cphilli, I would contact someone at Amsoil and ask them their recommendations. Don't go to a supplier because they will just read the website to you. The first thing I noticed is the ISO VG (viscosity grade). The HP Injector is a much 'lighter' oil with a VG of 39.6, whereas the Saber is 141.2 VG. That is a considerable difference. I assume VG requirements for a DFI/EFI differs from a pre-mix lube. Anyways, the Saber is a 100:1 (pre-mix ony application) and the HP Injector is 50:1 mix and can be used in injection systems, again could be recommended because of the different viscosities. There is an application guide also you can click on and it will give you general guidelines for what their products are used for.
Edited by Targa01 6/11/2007 2:23 PM
|
