Muskie Discussion Forums

Forums | Calendars | Albums | Quotes | Language | Blogs Search | Statistics | User Listing
You are logged in as a guest. ( logon | register )
Posting a reply to: 2008 G3 v172 tiller with 40hp...will it work???

Back
Muskie Fishing -> Muskie Boats and Motors
Guest name
Subject
Message

Emoticons
HTML: Yes
Anonymous: Yes
MBBS Code: Yes


Disable HTML
Post anonymously
Enable emoticons



hi


You are replying to:
missourimuskyhunter
Posted 6/7/2007 3:50 PM (#259895)
Subject: 2008 G3 v172 tiller with 40hp...will it work???





Posts: 1316


Location: Lebanon,Mo
just wondering if anyone could give me some advice or if you have done this before. i know its a big boat for a 40hp,but one of the "good" musky lakes down here is limited to a 40hp motor. i had a lund rebel 1650 with a 40,but i wanted more room.i have done some research with boats this size and weight,and have found that with the motor proped right,i could possibly still top out about 25mph. i have already ordered this outift from G3 and will be mine very soon. they have not tested this boat with a 40hp,but did with a 60hp and said it topped out just over 30mph. below is a list of things to maybe calculate and put in your info......thanks.

approx hull wt. 1230lbs
boat length 17'2"
beam 92"

40hp 4-stroke yamaha.

props to start out with 10 3/8 x 13 and 10 5/8 x 12

my lund rebel 1650 with three grown men and tackle still topped out at 30mph with the 40hp. (10 1/4 x 14 prop) 5400rpms i think??

i know of a lund 16.5 ft with full windshield that is powered by a 40hp with no problems,maybe a explorer????

(Delete all cookies set by this site)