Posts: 3242
Location: Racine, Wi | Hey all, I was lucky enough last fall to "pull" the front bracket off of my boat. I turned a little tight backing into the driveway, and it stripped the screws out of the wood. I have seen some things in the hardware store for filling the holes and redrilling to get the screws to hold once again. Any recommendations? Should I use epoxy, or some other material that will bond with the wood, so I can redrill and remount the plate? Any help for a disfunctional handyman would be appreciated. I don't have another spot in the boat to mount it, so I need to find a fix for the holes in it already. |
